Each pushbutton comes with a lock nut and arcade quality microswitch.
Available in 6 different colours.

Each pushbutton comes with a lock nut and arcade quality microswitch.
Available in White or Black with Player Legends for P1 and P2, or White only for P3 and P4.

Unlike most other pushbuttons on the market, the GoldLeaf buttons use a leaf switch instead of a microswitch. This means no clicking and results in an almost silent button. There is also no internal spring so the button only requires a very light press to actuate it.

This makes the GoldLeaf a great alternative to a “proper” leaf switch type button in a pinball machine (Virtual or real), as they offer the same feel but without the hassle of needing to adjust the leaf switch all the time, which can be a pain to get right!

The moving part of the button is ultra-light and only 10mm deep unlike other types where the plunger extends the full depth of the button. The type of switch used allows for very accurate contact close and open points resulting in superior accuracy compared to a microswitch.

The typical long threaded barrel and nut design provides a perfect alternative to those who want a silent light touch button but need to mount it into a thicker timber panel rather than a thin metal panel that the Sanwa and Seimitsu buttons are designed for. A panel up to 19mm thick is no problem for the GoldLeaf. And of course it HAS to be a dimple top which helps the player “find” the middle of the plunger and further increases accuracy.

Gold plating on the switch contacts and external terminals ensure that the GoldLeaf button delivers top performance for a VERY long time!

Note that although the terminals are 2.8mm, the larger 6.3mm connectors used in our Wiring Kit will still fit satisfactorily on these buttons – you may just need to give the connectors a light “pinch” with some pliers to help them stay on the terminals securely.

Each button contains a “non-clicking” microswitch which makes it very smooth and extremely quiet. With its fast response and short throw the OBSF-30 is regarded as one of the best competition pushbuttons on the market, especially by devotees of fighting games such as Street Fighter.

These pushbuttons require a 30mm diameter hole and will mount in a panel between 2mm and 5mm thick. If you plan to use them in a panel thicker than this either the panel or the pushbutton(s) will need some modification. Please ensure that you consider this before ordering.

Each button contains a “non-clicking” microswitch which makes it very smooth and extremely quiet. They are the perfect button to complement a panel already fitted with Sanwa OBSF-30 button, or as a substitute if you prefer a slightly smaller button!

These pushbuttons require a 24mm diameter hole and will mount in a panel between 2mm and 5mm thick. If you plan to use them in a panel thicker than this either the panel or the pushbutton(s) will need some modification. Please ensure that you consider this before ordering.

As shown in the product pictures, the buttons come with a 6mm ‘spacer’ which allows the button to be mounted into a 25mm diameter hole. By removing the spacer, the button can achieve a very low profile on your control panel, however it then requires a 28mm diameter hole.

When mounted without the spacer these buttons are a great for use as “action” buttons, especially for those who enjoy fighting games!

Each pushbutton comes with a lock nut and arcade quality microswitch. They are also supplied with a COLOURED 12v LED for illumination, which can be connected to an appropriate power supply without any modification.

The buttons come with a 6mm ‘spacer’ which allows the button to be mounted into a 25mm diameter hole. By removing the spacer, the button can achieve a very low profile on your control panel, however it then requires a RECTANGLAR hole 48mm x 29mm and at least 8mm deep to be mounted in that fashion.

Each pushbutton comes with a lock nut and arcade quality microswitch. They are also supplied with a COLOURED 12v LED for illumination, which can be connected to an appropriate power supply without any modification.

Also available as a Coin Button. Click on the “Related Products” tab for more info.

The buttons come with a 6mm ‘spacer’ which allows the button to be mounted into a 25mm diameter hole. By removing the spacer, the button can achieve a very low profile on your control panel, however it then requires a SQUARE hole 30mm x 30mm and at least 8mm deep to be mounted in that fashion.

Each pushbutton comes with a lock nut and arcade quality microswitch. They are also supplied with a COLOURED 12v LED for illumination, which can be connected to an appropriate power supply without any modification.

We print a high resolution label and insert it into our Rectangular Illuminated Pushbutton, which is then backlit using a 12v COLOURED LED to give superior colour saturation. The end result is a button of striking appearance and its purpose is immediately obvious to the user.

Due to demand these buttons are available in Red, Blue, Yellow and Green. A microswitch and coloured 12v LED are included with each button.

As shown in the picture on the right, unlike our other Illuminated buttons these DO NOT come with a spacer, which means the buttons must be mounted into a triangular hole.

The TRIANGULAR hole needs to be equilateral, measuring 41mm x 41mm x 41mm and at least 8mm deep.

Each pushbutton comes with a lock nut and arcade quality microswitch. They are also fitted with a COLOURED 12v LED for illumination, which can be connected to an appropriate power supply without any modification.