We have several different types of arcade quality pushbuttons and microswitches available. They act as perfect replacements in existing cabinets and will perform faultlessly in that project cabinet you are building.
If you are looking for a particular type of button or microswitch that does not appear below, 
us as we may be able to get them in for you.
Also, you may have noticed that we are beginning to produce our own labels for use with our illuminated buttons, so if there is a particular label you'd like then let us know so we can consider expanding the range.
*On special until further notice.
The Sanwa OBSF-30 button is widely used in Japanese cabinets such as Astro City. They feature a slightly convex plunger and snap-in installation and can be mounted into a panel that is 2mm to 5 mm thick.
Each button contains a "non-clicking" microswitch which makes it very smooth and extremely quiet. With its fast response and short throw the OBSF-30 is regarded as one of the best competition pushbuttons on the market, especially by devotees of fighting games such as Street Fighter.
Options:
These are a classic 'dimple top' style button as used in most arcade games and simply the best quality arcade pushbutton you will find.
Each pushbutton comes with a lock nut and industrial quality microswitch.
Options:
These are the same as above, however they are available in WHITE ONLY and have Player 'Legends' screen printed on them.
Each pushbutton comes with a lock nut and industrial quality microswitch.
Options:
These are a very stylish illuminated button 30mm in diameter, with a slightly domed top and a raised black bezel. The plunger of these buttons can be disassembled for a label to be inserted under the transparent cover.
As per the picture on the right the buttons come with a 6mm 'spacer' which allows the button to be mounted into a 25mm diameter hole.
By removing the spacer, the button can achieve a very low profile on your control panel, however it then requires a 28mm diameter hole.
When mounted without the spacer these buttons are a great for use as "action" buttons, especially for those who enjoy fighting games!
Each pushbutton comes with a lock nut and industrial quality microswitch. They are also fitted with a 12v LED for illumination, which can be connected to an appropriate power supply without any modification.
Options:
For just $1.00 extra, you can now upgrade your buttons with labels and a COLOURED LED.
Labels available are shown in the 'slideshow' above.
These are a rectangular illuminated button measuring 52mm x 34mm, with a slightly domed top. The plunger can be disassembled for a label to be inserted under the transparent cover.
As per the picture on the right the buttons come with a 6mm 'spacer' which allows the button to be mounted into a 25mm diameter hole.
By removing the spacer, the button can achieve a very low profile on your control panel, however it then requires a RECTANGLAR hole 48mm x 29mm to be mounted in that fashion.
Options:
*NEW* Also available as a "Coin Button" with a label inserted under the plunger, as shown in the picture to the right. Click 
for more info or to order one!For just $1.00 extra, you can now upgrade your buttons with labels and a COLOURED LED.
Labels available are shown in the 'slideshow' above.
Also available as a "Coin Button". Click for more info or to order one!
These are a square illuminated button measuring 34mm x 34mm, with a flat top. The plunger can be disassembled for a label to be inserted under the transparent cover.
As per the picture on the right the buttons come with a 6mm 'spacer' which allows the button to be mounted into a 25mm diameter hole.
By removing the spacer, the button can achieve a very low profile on your control panel, however it then requires a SQUARE hole 30mm x 30mm to be mounted in that fashion.
Options:
For just $1.00 extra, you can now upgrade your buttons with labels and a COLOURED LED.
Labels available are shown in the 'slideshow' above.
These are a triangle illuminated button measuring 45mm x 45mm x 45mm, with a flat top. The plunger can be disassembled for a label to be inserted under the transparent cover.
As shown in the picture on the right, unlike our other Illuminated buttons these DO NOT come with a spacer, which means the buttons must be mounted into a triangular hole.
The TRIANGULAR hole needs to be equilateral, measuring 41mm x 41mm x 41mm.
Options:
For just $1.00 extra, you can now upgrade your buttons with labels and a COLOURED LED.
Labels available are shown above.
These LEDs use a standard "wedge" type fitting and can be used to replace existing globes with a similar fitting.
They are very popular as an upgrade for existing filament globes, as LEDs will last longer, generate far less heat and consume less power.
Each lamp is supplied as pictured above, ready for connection to an appropriate power supply without the need for any modification.
These are for filling disused button or joystick holes - rather than fabricating a new control panel for your refurbished arcade cabinet, simply fill the unwanted holes with these plugs.
They can be used to plug holes from 23.5mm to 29.5mm in diameter and come in black only. The plugs are slightly domed but maintain a very low profile.
If you have any faulty microswitches that need replacing or you simply want some spares, we have three different types available to suit pretty much all arcade pushbuttons and joysticks in existence!
These are your garden variety microswitch which will fit into most pushbuttons and many joysticks. They are rated to 10,000,000 clicks so they will last a while...
Same as above, except with a metal lever to suit joysticks and a few oddly designed pushbuttons.
These microswitches are designed for use with most non-electronic Coin Mechanisms. They have a 7cm long wire lever that can be bent at whatever angle you require and have a very light action so they "click" easily.
